ADC 500L - Manual (Page 29)

PRELIMINARY Chapter 4: Setting Up For Configuration
Megabit Modem 500L Installation Manual 21
PR
EL
IM
IN
A
RY
S
AVING THE
C
ONFIGURATION
As you make changes to the modem configuration, click the Submit button on the Web page to
accept changes and write the changes to RAM. Some configuration changes are not permanent,
however, until you write them to Non-Volatile RAM (NVRAM) and reset the modem. You
must reset the modem to effect these changes:
• when defining PPP over ATM LAN settings (see page 39 ):
– LAN IP address
– LAN network mask
• when DHCP enabled (see page 39 ):
– DHCP start IP address
– primary DNS IP address
– secondary DNS IP address
See the following sections to:
• save configuration changes to NVRAM ( page 22 )
• reset the modem to activate the configuration ( page 25 )
• reset the modem to restore the factory default values ( page 23 )