ADC 500L - Manual (Page 74)

Hardware PRELIMINARY
66 Megabit Modem 500L Installation Manual
PR
EL
IM
IN
A
RY
H
ARDWARE
The following provides additional information about Megabit Modem 500L such as the
installation kit and modem connectors pinouts.
Installation Kit
The following items are included in the installation kit and are used to install the Megabit
Modem 500L as shown in
Chapter 3 on page 11 .
Part Description Function
Rubber feet Four black rubber feet Attaches to the base of the modem.
Grey cable Silver-satin phone cord with 4-pin modular
plugs (straight-through) Connects the modem ADSL connector to the
wall phone jack for access to the Internet.
Black cable CAT 5, cable with 8-pin modular plugs
(straight-through) Connects the modem 10/100BASE-T connector
to the LAN through a hub or to a PC NIC.
Power cable Power supply with optional power cord (this
item is ordered dependent on the type of
power supply and cord required for your
location) Connects the modem POWER connector to the
local power source.
Screws Two 6x 1 /
2
-inch sheet metal screws Installs into a wall for wall-mounting modems.