Configuring the wan, Pr el im in a ry – ADC 500L User Manual
Page 44
Configuring PPP over ATM Sessions
PRELIMINARY
36
Megabit Modem 500L Installation Manual
PR
EL
IM
IN
A
RY
Configuring the WAN
Configure the WAN parameters for PPP over ATM sessions between the Megabit Modem 500L
and the service provider.
1
Do the following to configure the WAN:
.
Select a name for the service that is descriptive. The service name is an
identifier you use for the session and is not used for anything else. Each
service name must be unique. When you enter a service name, it displays as
the Port name for that session on the EasySession page.
Enter a descriptive name for the
Service Name
. The name you enter here also displays
in the
Port
field on the
EasySession
page (the fields are linked). Use a maximum of
19 characters for the service name, with no spaces allowed in the name.
Enter the
ATM VPI
and
ATM VCI
values provided by the service provider. The
addresses are the virtual path identifier and virtual channel identifier for the session
connection (ATM) between the modem and the service provider. (See
for
the VPI and VCI values you recorded from the service provider. Also, see
for information on VPI and VCI values.)
Enter your
Login Name
and
Login Password
supplied by the service provider. (See
“Login Name / Login Password Worksheet” on page 74
.)