Configuring the lan, Pr el im in a ry – ADC 500L User Manual
Page 47
PRELIMINARY
Chapter 6: Configuring Sessions
Megabit Modem 500L Installation Manual
39
PR
EL
IM
IN
A
RY
Configuring the LAN
1
Click
EasySession
on the
Main Menu
to access the
EasySession
page.
2
At the top of the
EasySession
page, click
Edit
next to
LAN Configuration
to display the
PPP Over ATM LAN Configuration
page.
3
Do the following to configure the LAN:
Enter the
IP Address
and
IP Net Mask
(subnet mask) for the modem Ethernet
10/100BASE-T LAN port. The IP address will not take effect, however, until the
modem is reset.
Select
DHCP Enable
if you want to enable the modem to act as a DHCP server to
automatically assign IP addresses to devices on the LAN. If you enable DHCP,
ensure that all devices on the LAN have the TCP/IP stack set to
Obtain an IP address
automatically
(see
).