Techne TC-4000 - Manual (Page 25)

FRONT PANEL CONTROLS
THE LCD DISPLAY
INDICATORS
Power: This indicator is lit when there is power to the TC-4000.
Status: This indicator is lit when the TC-4000 is running a program. It is off when the unit is
stopped. It will flash and beep slowly when the unit is paused. It will flash after a five second
quick sequence of beeps when the unit reaches its final hold temperature.
7
pqrs
8
tuv
9
wxyz
0
TC-4000
4
ghi
5
jkl
6
mno
1 2
abc
3
def i
Programs [0]
Information
Configuration
[ , to select ]
23
Operation or
Program lines
Decimal Point
& Insert
Delete
Pause
Status
Enter
Prompt line
Up
End
Down
Power
Alpha/Numeric
keys
The TC-4000 has a four line LCD display. The
top three lines are information or program
lines, while the bottom line is a prompt line.
The active line flashes on screen and is shown
in bold in this manual.
The bottom line may change or flash between
two or three different prompts depending
upon which program line is active. An example
of a prompt line which flashes between three
different prompts is shown here.
i
Programs [0]
Information
Configuration
[ , to select ]
-------- Stage 1 ---------
Number cycles 10
Step 94.0° C 00m30 max
[ '.' to insert step ]
[ , to edit ]
[ to delete step ]