Techne TC-4000 - Manual (Page 31)

[ to disable ]
[ turn on/off ]
29
To edit a temperature, type in the required
temperature. In the example here, the heated
lid temperature is being edited.
Press "Enter" to accept.
Use the "Down Arrow" and/or the "Up
Arrow" keys to select the next field or
step you wish to edit.
To edit a field with on/off settings, first select
the field and press "Enter"
Use the "Up Arrow" and "Down Arrow" keys
to toggle between the settings.
Press "Enter" to accept.
To edit a step with both a temperature and a
time, first press "Enter" and type in the
new temperature. Press "Enter" again.
Now type in the new time. The default is
minutes.
1. For whole minutes, type the number
required then "Enter"
2. To toggle between minutes and hours, use
the "Decimal Point" key.
3. For values less than 1 minute, first press the
"Decimal Point" key followed by the
number of seconds required.
4. For minutes and seconds, type the number
of minutes followed by the "Decimal
Point" key then the number of seconds.
Once the values have been added, press
"Enter" to accept.
Once you have finished editing and you are
happy with the changes, press the "End" key
followed by the "Enter" key to save.
If you press the "End" key a second time
for 'No' then all the changes you have made
will be lost.
DONNA
Heated Lid 105°C
Preheat Lid on
[ edit temperature ]
DONNA
Heated Lid 105°C
Preheat Lid on
[ to change ]
[ to disable ]
[ .for hrs/mins ]
Pause off
-------------------------
In denat 4.0°C 00 m30
[ edit temperature ]
9
Pause off
-------------------------
In denat 94.0°C 0 m30
[ edit time ]
0
-------------------------
Fin extn 72.0°C 5m00
Fin hold 10.0°C
[ , to edit ]
[ to save ]