Techne Prime Elite - Manual (Page 27)

25
The temperature value will now appear orange in
the programming screen indicating that it contains a
modified function.
To decrease the step temperature per cycle:
• For a decrease in temperature per cycle, touch
the button below Decrease Per Cycle to turn
this function on. Next touch the temperature
entry button below this.
A new screen will open which is similar to the
simple temperature entry screen. The maximum
decrease in temperature per cycle (based on the
number of cycles and the temperature limits of the
unit) will be shown.
• Enter the required value.
• Touch DEL to clear the entry.
• If an entered decremented temperature is
invalid, a prompt will indicate the acceptable
range.
• Touch OK to return to the previous screen.
The decrease in temperature per cycle will now be
displayed.
• Touch OK again to return to the programming
screen.
• Touch Cancel to return to the programming
screen if no changes are required.