Techne Prime Elite - Manual (Page 55)

53
EDITING A PROGRAM
EDITING SAVED PROGRAMS
First select the required program by searching the Run a program module.
• To edit a selected program, touch the Edit
button.
Any of the Program Options, Settings or thermal
cycling parameters can be edited.
• Once all the required changes have been
made, touch Save.
Note: this will overwrite the existing program.
To copy a program for editing, please see section
VIEW FILES.
EDITING TEMPLATES
Editing templates can be a quick method of creating
a program by just changing a few key parameters.
However it is not possible to save changes to the
templates installed on the thermal cycler.
If the edited program is a template, touching Save
will open the message box shown opposite.
• Touch the None button next to New Program
Name and enter a name for the edited program.
• Touch Save As New Program to save the
changes.
The re-named program will now be listed in the
program list.