Thermo Fisher Scientific CyberScan pH 1100/pH 2100 - Manual (Page 27)

Instruction Manual pH 1100/ 2100
27
10 SETUP MODE
The advanced setup mode lets you customize your meter’s preferences and defaults. The pH 2100 benchtop meter
features 4 different setup modes (the pH 1100 meter features 3 modes):
1. pH/Temperature
2. mV
3. Ion (pH 2100 only)
4. Meter general configuration
Each setup mode has submenus to configure specific meter parameters.
10.1 Setup mode overview
10.1.1 pH/Temperature setup submenus
Press SETUP to enter setup mode from the pH measurement mode. Use >/CAL to select pH/Temp, and then press
ENTER to enter pH/Temp setup mode. Use the
∆/MI and ∇/MR keys to scroll through sub menus. There are 8 sub
menus (programs) in the pH/Temperature setup mode:
pHCalDue Alarm: P1.4
Press ENT. to Select
Stability Setup: P1.5
Press ENT. to Select
pH Cal Data :P1.6
Press ENT. to Select
pH Cal Reset :P1.7
Press ENT. to Select
pH Buffer Setup:P1.0
pH Resolution Setup:P1.1
Temperature Unit Setup:P1.2
pH Measurement Alarm
Setup P1.3
-Selects calibration buffer sets
(USA, N IST, Bf1, Bf2 or
custom)
-Selects pH resolution
(0.01 or 0.001 pH)
-Selects temperature
measurement unit (°C or °F)
-Sets low and high pH alarm
pH Calibration Due Alarm
Setup:P1.4
Stability Setup:P1.5
View Calibration Data:P1.6
pH Calibration Reset:P1.7
-Sets calibration reminder
alarm, select 1-365 days
from last calibration date
-Sets stability indicator
criteria, off or on (high,
medium or low )
-Last pH calibration
date/time
-pH buffer set selected
-pH calibration temperature
and temperature
compensation mode
-pH offset value
-pH slopes (from acid to
alkaline)
-Clears all pH calibration
data
see page 30
see page 31
see page 31
see page 32
see page 33
see page 34
see page 35
see page 36
pH Buffer Setup: P1.0
Press ENT. to Select
pH Resol. Setup: P1.1
Press ENT. to Select
Temp Unit Setup:P1.2
Press ENT. to Select
pH Meas. Alarm :P1.3
Press ENT. to Select