Thermo Fisher Scientific CyberScan pH 1100/pH 2100 - Manual (Page 48)

Instruction Manual pH 1100/ 2100
48
10.4.7 View ion calibration data setup program P3.5
Use this program to view the following:
• Last ion calibration date/time
• Calibration points with absolute mV values
• Ion slope values
1. Enter ion setup mode as described in steps 1-4 in Section
10.4.1 Entering ion setup mode (page 43).
2. Use
∆/MI key to scroll to program Ion Cal Data: P3.5.
See Figure 146.
3. Press
ENTER to enter program Ion Cal Data: P3.5. The first
screen in Ion Cal Data: P3.5. is the Ion Cal Date/Time.
See Figure 147.
4. Press
ENTER to proceed to the second screen, showing 1
st
and 2
nd
ion calibration points and corresponding absolute mV
value. See Figure 148.
5. Press
ENTER to proceed to the third screen, showing 2 nd and
3
rd
ion calibration points and corresponding absolute mV value.
See Figure 149.
6. Press
ENTER to proceed to the fourth screen, showing 3
rd
and
4
th
ion calibration points and corresponding absolute mV value.
See Figure 150.
7. Press
ENTER to proceed to the fifth screen, showing 4
th
and 5
th
ion calibration points and corresponding absolute mV value.
See Figure 151.
8. Press
ENTER to proceed to the sixth screen, showing Ion
Slope 1 and 2 mV value. See Figure 152.
9. Press
ENTER to proceed to the seventh screen, showing Ion
Slope 2 and 3 mV value. See Figure 153.
10. Press ENTER to proceed to the eighth screen, showing Ion
Slope 3 and 4 mV value. See Figure 154.
Press
∆/MI key to continue to the next setup program, or Press
∇/MR to go to the previous program. Press EXIT to return to ion
measurement mode.
NOTE: While viewing calibration data, you may press EXIT at any
time to return to the setup mode.
Ion Cal Data :P3.5
Press ENT. to Select
1st :0.001 0.6 mV
2nd:0.010 50.1 mV
Figure 146
Figure 147
Figure 148
Figure 149
Figure 150
Figure 151
Figure 152
Figure 153
Figure 154
Ion Cal Date/ Time
Jan 22 2002 14:55:38
2nd:0.010 50.1 mV
3rd :0.100 100.8 mV
3rd:0.100 100.8 mV
4th: 1 .00 149.4 mV
4th: 1 . 00 149.4 mV
5th: 10 . 0 201.0 mV
Ion Slope1 = 49.5 mV
Ion Slope2 = 50.6 mV
Ion Slope2 = 50.6 mV
Ion Slope3 = 48.6 mV
Ion Slope3 = 48.6 mV
Ion Slope4 = 51.5 mV