Thermo Fisher Scientific CyberScan pH 1100/pH 2100 - Manual (Page 41)

Instruction Manual pH 1100/ 2100
41
10.3.5 View mV calibration data setup program P2.3
Use this program to view the following:
• Last mV calibration date/time
• mV offset value
1. Enter mV setup mode as described in steps 1-4 in Section
10.3.1 Entering mV setup mode (page 37).
2. Use
∆/MI to scroll to program mV Cal Data: P2.3. See Figure
122.
3. Press
ENTER to enter program mV Cal Data: P2.3. The first
screen in mV Cal Data: P2.3. is the mV Cal Date/Time. See
Figure 123.
4. Press
ENTER to proceed to the second screen. This screen
shows current mV offset value. See Figure 124.
5. Press
ENTER to return to the setup mode.
Press
∆/MI to continue to the next setup program, or press
∇/MR to go to the previous program. Press EXIT to return to
mV measurement mode.
Note: While viewing calibration data, you may press EXIT at any
time to return to the setup mode.
mV Offset = 3.2 mV
mV Cal Date/ Time
Jan 22 2002 11:55:08
mV Cal Data :P2.3
Press ENT. to Select
Figure 122
Figure 123
Figure 124