Time Electronics 1077 Milliamp Transducer Simulator - Manual (Page 12)

12
1077 Technical Manual P a g e | 12
4.8. Operation as a Line Simulator
As a current source the 1077 will
supply the set current to the load
24 Volt Line
In this mode the 1077 supplies a constant 24V. The current taken by the transducer can be
accurately measured on the 1077:
1. Turn on the 1077 and select the line position of the load line source switch.
2. Turn the output switch ON.
3. Read output current on the LCD display.
I mA
24 Volts
Transducer