West Control Solutions TB 40-1 Temperature Monitor - Manual (Page 16)

othr
Name Value range Description Default
Unit
Unit 1
0 without unit
1 °C
2 °F
dP
Decimal point (max. number of digits behind the decimal
point)
0
0 No digit behind the decimal point
1 1 digit behind the decimal point
2 2 digits behind the decimal point
3 3 digits behind the decimal point
diSP
Type of measured value display 1
0 No measured value display
1 Full display resolution
2 Display resolution: 2 digits
3 Display resolution: 5 digits
4 Display resolution: 10 digits
C.dEl
0..200 Modem delay [ms] 0
FrEq
Switching 50 Hz / 60 Hz (only visible with BlueControl!) 0
0 50 Hz
1 60 Hz
g
Resetting the device configuration to factory setting (Default)
r chapter 10.1 (page 30)
+
BlueControl - the engineering tool for the BluePort
â
controller series
3 engineering tools with different functionality facilitating TB40-1 configuration
and parameter setting are available (see chapter 8: Accessory equipment with or-
dering information).
In addition to configuration and parameter setting, the engineering tools are used
for data acquisition and offer long-term storage and print functions. The enginee-
ring tools are connected to TB40-1 via the front-panel interface "BluePort
â
" by
means of PC and a PC adaptor.
Description BlueControl: see chapter 7: BlueControl (page 23).
Configuration level
Configuration 16 TB40-1