Audient ASP8024 Dual Layer Control Module - Manual (Page 19)

Page -19- © Audient Ltd
Control Surface Functions
Transport Panel
The transport panel on ASP2802 provides access to the
following functions:
• Rewind (3)
• Fast-Forward (4)
• Stop (5)
• Play (6)
• Record (7)
A jog wheel (8) is also
provided and can be
used to control several
DAW commands.
When operating the rewind or fast-forward controls (3 & 4) it
should be noted that one switch press initiates a small jump in
either direction and you must press and hold either switch to
perform playhead rewind or fast-forward. Releasing the switches
will return to the previous mode of operation (
stop or play ).
A double tap on the stop control (5)
provides return to playhead start
location functionality, placing the
playhead wherever the last start
position was located.
You can activate a return to start
on stop command in the transport
section of Cubase / Nuendo
preference (see right >>>)
The jog wheel (8) operates as a
silent re-position of the playhead
cursor, with clockwise movements positioning the playhead
cursor forwards in time and anti-clockwise movements
positioning the playhead cursor back in time.