Audient ASP8024 Dual Layer Control Module - Manual (Page 8)

Page -8- © Audient Ltd
Automation Enable / Safe
A Note on Automation Safe
Automation safe should be used when you want to isolate a
particular channel from automation - for example - to audition
rides without “fighting” existing automation data or without
“printing” the rides if channels are still in write enabled.
When the console boots automation safe is engaged by default.
If you wish to automate a channel you must first press the
automation safe switch (in the select mode panel) and then
turn off automation safe from each channel you wish to
automate.
Note that all select mode layers are stored and function
simultaneously. By toggling the select mode switches in
conjunction with the large green channel select switches it is
possible to obtain rapid control of SIP safe, DAW record enable,
select, unity and automation safe channel settings.
All select mode layers are stored even after a power down, so
remember to clear them manually if the next session requires a
different setup.