Audient ASP8024 Dual Layer Control Module - Manual (Page 15)

Page -15- © Audient Ltd
Control Surface Setup
Assuming that you have followed all steps outlined in the
networking section, you will have connected ASP2802 to your
studio computer and connected to the console via
AuNet .
To set-up ASP2802 as a control surface
for Logic please follow these steps:
Step 1 : Press the ASP2802 Setup
button and select Logic in the
host software option page using
the rotary encoder,
Please note that the setup light will flash if you have
changed from another host software selection, press
the setup switch to confirm.
Step 2 : Exit ASP Setup, boot Logic and navigate to Logic Pro >
Preferences > Control Surfaces > Setup...