Audient ASP8024 Dual Layer Control Module - Manual (Page 34)

Page -34- © Audient Ltd
Control Surface Functions
Select Modes - Analogue Layer cont.
Unity - used in the analogue layer to provide a quick and
easy way to position the channel fader at the unity gain
(0 dB) position. This is very useful if you are setting up a
stem session for analogue summing etc.
To use these functions, press the function required in the select
mode panel and then the large channel select switches (18)
on each and every channel that requires the application of the
function selected.
Channel Solo & Cut
When in DAW layer the large channel cut and
solo switches (23 & 24) perform mute and solo
functionality within Logic.
If you are using any internal Logic grouping
you may find it useful to group these functions
to provide quick and easy solo or cut auditioning
across a larger group of channels.