JJC RM-E4 User Manual
Page 2
2
z Identifying the buttons
controls zoom, image display, and toggle displays
z Specification
z 100% compatible with Pentax Remote E infrared remote controls.
z Works with all remote shutter release control modes (Quickresponse, W/T Zoom).
z Easytoreplace CR2025 lithium battery.
z Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
z Typical Battery Life: up to 3 years, 20,000 exposures.
z To Replace the Battery
1. The remote control is powered by a three-volt CR2032 lithium battery which is already included in.
2. After sliding the latch in the direction shown to unlatch the battery holder, remove the holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place