JJC TM Series Multi-Function Timer Remote control - Manual (Page 3)

Automatic Automatic Automatic Automatic Function Function Function Function Description: Description: Description: Description:
Automatic Timer Function, Choose the Delay / Self Timer (DE DE DE DE), BULB/Long Exposure (BU BU BU BU), Interval
Timer (INT INT INT INT) and number of shots for timed interval photography exposure (Exposure Count (N N N N)).
Following table is the setting about the camera shutter speed.
1. Camera Setting
a) Connect the TM controller to the camera and turn ON.
b) Adjust the camera setting
2. Set TIMER
Press the SET button (7). The SET icon will flash in the Control Panel (1).
Adjust the following settings
IMPORANTANT:
Please ensure the Interval time is longer than Exposure timer at least 2 seconds.
Exposure Exposure Exposure Exposure Mode Mode Mode Mode M (manual)
Shutter Shutter Shutter Shutter Speed Speed Speed Speed BULB
Interval Interval Interval Interval Timer Timer Timer Timer OFF
Focus Focus Focus Focus Mode Mode Mode Mode Auto Focus or Manual
Continuous Continuous Continuous Continuous S (single frame)
Option Option Option Option Description Description Description Description Supported Supported Supported Supported Setting Setting Setting Setting
DE
Just like the self timer on your camera. The TM timer
remote switch allows you to set any delay (in 1 second
increments) up to 99 hours, 99 minutes and 99 seconds.
0s to 99hrs 59min 59s
BU
It allows you to take time exposures up to 100 hours in
length.
0s to 99hrs 59min 59s
INT
The Interval Timer can be set to any time period up to 100
hours as well. If you set it to 10 minutes, for example, one
exposure will be taken every 10 minutes until either the film
runs out or the Exposure Count limit has been reached.
1s to 99hrs 59min 59s
N
This setting permits you to set the number of exposures that
will be taken, up to 399 shots.
1 to 399 shots, --(unlimited)
Speaker ON/OFF ON/OFF
Delay(DE DE DE DE), Exposure/BULB(BU BU BU BU) and Interval Settings (INT INT INT INT)