Before requesting repair – PATLITE BSV User Manual

Page 27

Advertising
background image

- 27 -

13. Before Requesting Repair

Problem

Where to Check

No Sound Coming

out of Speaker

• Make sure the polarity and rated voltage for the wiring is correct.

(Refer to pg. 11 "6. Wiring")

• Make sure the signal input wiring connections are correct.

(Refer to pg. 11 "6. Wiring")

• Double check the volume.

(Refer to pg. 13 �7-1. Volume Adjustment��

• Check that the proper operating mode is written into the product.

(Refer to pg. 15 �8-1. Operation Modes��

• Verify the SD card contents. (Refer to pg. 21 "8-2. SD Card Operation")

A different channel

plays back

• Make sure the input wiring connections are correct.

(Refer to pg. 11 "6. Wiring")

• Make sure the input signals are correct.

(Refer to pg. 15 �8. Various Functions and Playback Methods� or, pg. 25 �10. Binary Input Table��

• Double check the data in the SD card.

(Refer to pg. 21 �8-2-1 Operating Mode Configuration File")

The sound is low

• Check whether the sound reduction is active and the inputs are on or not.

(Refer to pg. 14 �7-2. Sound Reduction Function��

• Double check the volume. (Refer to pg. 13 �7-1. Volume Adjustment��
• Check the sound level of the MP3 data and refer to the MP3 editing software document before

editing.

Cannot rewrite the

voice message

• Make sure the contents in the SD card are correct. (Refer to pg. 15 �8-1. Operation Modes��
• Make sure the data size did not exceed 508KB. (Refer to pg. 28 �14-2. Performance

Specifications")

• Make sure the format for the SD card is FAT1�. (Refer to pg. 24 �8-2-4 Rewriting procedure for

setting MP3 data and Operation Mode��

• Make sure the write protect to the SD card is disabled. (Refer to pg. 24 �8-2-4 Rewriting

procedure for setting MP3 data and Operation Mode��

The sound reduction

function doesn't

operate

• Check whether the contents of the SD card is correct. (Refer to pg 14 "7-2. Sound Reduction

Function��

• Check whether the SD card is formatted for FAT16. (Refer to pg. 24 "8-2-4

Rewriting

procedure for setting MP3 data and Operation Mode��

• Check whether the operating mode configuration file is correct. (Refer to pg. 21 "8-2-1

Operating Mode Configuration File")

The Operating Mode

doesn't operate at the

mode it was set for.

• Check whether the operating mode configuration file is correct. Refer to pg. 21 "8-2-1

Operating Mode Configuration File".

The SD card is

not being read

• Make sure the SD Card is from PATLITE. (Other SD Card's compatability is not guaranteed.)
• Make sure the write protect to the SD card is diabled. (Refer to pg. 24 �8-2-4 Rewriting

procedure for setting MP3 data and Operation Mode��

MP3 data is not being

played back correctly

• Check the bit rate and sampling frequency of the MP3 data. (Refer to pg. 28 "14-2. Performance

Specifications")

• Check whether MP3 tags were attached to the MP3 data. (Refer to pg. 28 "14-2. Performance

Specifications")

Even after proper connections and settings are performed, if the product does not operate properly, please see the

information on the last page of this document to contact your PATLITE Sales Representative.

Advertising