PATLITE BSV - Manual (Page 8)

- 8 -
5. Installation
5-1. Front Cover
Upright Inverted Sideways
• Request the installation and wiring be performed by a professional contractor. Otherwise, there is the
possibility that fire, electric shock or falling from high places may result.
WARNING
This product can be panel or wall mounted. Please attach in accordance with the procedure for mounting
after removing the front cover. Refer to the following figure (front view) for the mounting direction.
When installing or adjusting the volume control to this product, please open and close the front cover in the following
manner.
(1� Turn the front cover in the counter clockwise direction 45 degrees.
Assure there is ample rotation space available for the front cover when mounting.
(2) When attaching for wall-mounting, pull the front cover forward to remove, then pull-out the mounting screw and
O-ring.
(3� Please attach the parts removed in steps 1 and 2 in the reverse order to reassemble. Attach the front cover so that
the “↑UP” is on top. (Mounting Screw Recommended Torque: 0.3 N-m)
Use the M3X6 tapping screw indicated on the lower-right figure to fix the front cover.
(Recommended Torque: 0.3 N-m�
Attach the front cover so that the
arrow is alligned as indicated above.
(100)
Open
Mounting Screw
Volume
[mm]
Cover Locking
Hole
Cover Locking
Screw