PATLITE WDR-LE - Manual (Page 14)

14
Wireless Data Communication System Supplementary Operation Manual [8167-C]
■ For USB Connection
Please
●
Verify that the receiver is connected correctly.
1 Double click the WDS-AUTO2 icon
➡ The [Select File] dialog box opens. (First Time Only)
Note
●
From the second time on, when the definition file
for the [WDS-AUTO2] file is opened, the log output
operation setup is automatically started.
●
Use the Administrator authorization.
2 First, select the configuration file (example:
"PatUSB1.init"), then click the [Open] button
➡ Select the definition file created for the USB
connection.
3 After the "Please select a USB Port" message is
displayed, click the [OK] button after checking
that the USB port has been recognized
4 Select a COM port
➡ Be sure to click the "Enable" checkbox to activate the
COM port.
➡ Enter a Username if necessary.
(Up to ten full-width characters)
Double Click
(1) Select
(2) Click
Click
(1) Select
(2) Click