For lan connection – PATLITE WDR-LE User Manual
Page 16
16
Wireless Data Communication System Supplementary Operation Manual [8167-C]
■
For LAN Connection
Please
●
Verify that the receiver is connected correctly. (LAN Connection: Maximum 20 Receivers)
●
After the configuration file is changed, restart the application file.
1
Double click the [WDS-AUTO2] icon.
➡ The [Select File] dialog box opens. (First Time Only)
Note
●
From the second time on, when the definition file
for the [WDS-AUTO2] file is opened, the log output
operation setup is automatically started.
●
Use the Administrator authorization.
2
First, select the configuration file (example:
"PatLAN1.init"), then click the [Open] button
➡ Select the "*.init" file created for the LAN access.
3
When the message "Please setup the IP
Address." is displayed, click the [OK] button to
continue after checking that the LAN port is
connected
Double Click
(1) Select
(2) Click
Click