A&D Precision Health Scale UC-322 - Manual (Page 10)

Displaying Data Saved in Memory
The procedure below is an example of how to display the weight data of
user 1 that was saved in memory.
1
With the scale turned off, press and
hold the ON/OFF 1 switch.
To display the weight data of user 2,
press and hold the ON/OFF 2 switch.
2
Release the switch when - appears.
Then, press the ON/OFF 2 switch
within five seconds.
If the ON/OFF 2 switch is not pressed
within five seconds, the scale turns off
automatically.
3
The data number and weight data
are displayed.
Weight data is displayed in order from
the most recent to the oldest.
4
After the oldest data is displayed,
End appears and the scale turns off
automatically.
- 10 -