A&D Precision Health Scale UC-322 - Manual (Page 7)

Measuring Your Weight (With the preset height)
Up to 15 weight data can be saved in memory, each for user 1 and for user 2.
Additional measurements are saved by deleting the oldest data in memory.
After measurement, the BMI score is displayed.
The procedure below is an example of how to measure the weight of user 1
with the preset height of 179.1 cm.
1
Press the ON/OFF 1 switch. The
height currently set appears flashing.
To measure the weight of user 2, press
the ON/OFF 2 switch.
2
Wait until the OK symbol appears.
Wait until the display 0.00 kg and the
OK symbol appear. Step on the scale
gently.
3
Stand still during measurement.
When the OK symbol disappears, the
measurement sequence has initiated.
Stand still during the measurement.
4
Your weight is displayed after the
OK symbol appears.
5
Step off the scale.
6
The BMI score and the weight are
displayed alternately. At this time,
the weight is saved in memory.
After displaying the BMI score three
times and the weight two times, the
scale turns off automatically.
- 7 -