A&D Precision Health Scale UC-322 - Manual (Page 8)

Measuring Your Weight (With no preset height)
Up to 15 weight data can be saved in memory, each for user 1 and for user 2.
Additional measurements are saved by deleting the oldest data in memory.
The procedure below is an example of how to measure the weight of user 1,
of whose height has not been preset.
1
Press the ON/OFF 1 switch. 88888
appears flashing.
To measure the weight of user 2, press
the ON/OFF 2 switch.
2
Wait until the OK symbol appears.
Wait until the display 0.00 kg and the
OK symbol appear. Step on the scale
gently.
3
Stand still during measurement.
When the OK symbol disappears, the
measurement sequence has initiated.
Stand still during the measurement.
4
Your weight is displayed after the
OK symbol appears.
5
Step off the scale.
For five seconds, the weight is
displayed. At this time, the current
measurement is saved.
After five seconds, the scale turns off
automatically.
- 8 -