A&D Precision Health Scale UC-322 - Manual (Page 6)

Presetting Your Height
The scale can save a height between 30 cm and 220 cm in increments of
0.1 cm. The procedure below is an example of how to preset the height of
user 1 to 179.1 cm.
1
With the scale turned off, press and
hold the ON/OFF 1 switch.
To preset the height of the user 2, press
and hold the ON/OFF 2 switch.
2
Release the switch when - appears.
Then, press the ON/OFF 1 switch
again.
3
The height currently set appears.
When the height has not been preset
(factory setting), OFF appears. Under
this condition, the BMI calculation is not
available.
4
Set your height.
Press the ON/OFF 1 switch to
decrease the number, the ON/OFF 2
switch to increase the number.
Press and hold the switch to increase
or decrease the number continuously.
The setting range is 30.0 cm to 220.0
cm. When the number reaches 220.0,
OFF appears and the number returns
to 30.0.
5
After five seconds, the height is
saved in memory. End appears and
the scale turns off automatically.
- 6 -