PNI RM3100 Evaluation Board - Manual (Page 7)

PNI Sensor Corporation Doc 1017252 r02
RM3100 Evaluation Board User Manual Page 6 of 33
Table 3-2: Absolute Maximum Ratings
Parameter Minimum Maximum Units
Analog/Digital DC Supply Voltage, AVDD & DVDD -0.3 +3.7 VDC
Input Pin Voltage -0.3 AVDD or DVDD VDC
Input Pin Current @ 25C -10.0 +10.0 mA
Storage Temperature -40° +85° C
CAUTION:
Stresses beyond those listed above may cause permanent damage to the device. These
are stress ratings only. Operation of the device at these or other conditions beyond those
indicated in the operational sections of the specifications is not implied.
Table 3-3: Operating Conditions
Parameter Min Typ Max Units
Analog/Digital DC Supply Voltage, AVDD & DVDD
1
2.0 3.0 3.6 VDC
Voltage Ripple on AVDD or DVDD 0.05 V
PP
Idle Mode Current 1 µA
Leakage Current @ DVDD pin
(AVDD=AVSS=DVSS=0V, DVDD=3.6V)
100 nA
Operating Temperature -40 +85 C
Footnote:
1. Please contact PNI if operation at <2.0 V is required.