PNI RM3000 Sensor Suites - Manual (Page 15)

RM3000 & RM2000 Sensor Suite User Manual r08 Page 15 of 41
Note: PNI recommends using a 5 mil stencil and halide-free solder paste. Also, the
above layout allows for rework: for minimal footprint please contact PNI.
Figure 3-11: Sen-Z Solder Pad Layout
Figure 3-12: Sen-Z Tape and Reel Dimensions
Dimensions: mm
Full reel is 1200 pcs. Smaller quantities on cut-tape.
Tape & Reel meets ANSI/EIA standard EIA-418-B