Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 95)

Bulletin Number Chapter 7: Appendix 95 of 101
BLENDER ALARMS
1 (R) alarm_number,D1876 (see below for description)
2 (R) hop1_out_of_material,M561
3 (R) hop2_out_of_material,M562
4 (R) hop3_out_of_material, M563
5 (R) hop4_out_of_material, M564
6 (R) hop5_out_of_material, M565
7 (R) hop6_out_of_material, M566
8 (R) hopper_over_max_alarm,M570
9 (R) empty_weight_exceeded,M571
10 (R) inventory_cleared,M572 (use this bit to record when an operator cleared the inventory at the
blender)
11 (R) power_interruption,M576 (this alarm engages when the PLC loses power during a batch)
12 (R) hop1_low_level,M618 (this alarm is only available if the hoppers have low level prox switches)
13 (R) hop2_low_level,M619 (this alarm is only available if the hoppers have low level prox switches)
14 (R) hop3_low_level,M620 (this alarm is only available if the hoppers have low level prox switches)
15 (R) hop4_low_level,M621 (this alarm is only available if the hoppers have low level prox switches)
16 (R) hop5_low_level,M622 (this alarm is only available if the hoppers have low level prox switches)
17 (R) hop6_low_level,M623 (this alarm is only available if the hoppers have low level prox switches)
18 (R) plc_battery_low,s:M743