Sterlco BP800 Series Granulators - Manual (Page 22)

800 Series beside-the-press Chapter 4: Operation 22 of 43
Never push material into the hopper with hands!
If the hopper becomes blocked, the granulator must be turned OFF, and the power must
be locked out or the fuses removed.
4-3 Shut-down
Before stopping the granulator for the end of a working shift or for any other reason, stop
feeding the material and leave the granulator running for several minutes to allow the
cutting chamber to completely granulate and empty the material inside. Press the lighted
Start/Stop button to immediately turn off the granulator.
If the granulator stalls frequently during use, it may be necessary to adjust the
calibration of the “overload.” (Refer to the values shown in the electrical diagram.)