Timeguard EL17 - Manual (Page 6)

25
Programming sequence
Note: Button pauses greater than 1 minute during programming will result in
automatic return to the operating mode.
2 Setting Clock (after reset)
i Hour Setting – Press the <Change> button to advance
the hour setting. Note: For rapid hour selections press
and hold down <Change> button.
ii Minute Setting – Press the <Program> button once to
select the minutes – display shows clock symbol
and minute digits flashing. Press the <Change>
button to advance the minutes setting. Note: For rapid
minute selection press and hold down <Change>
button. (Note: 16 hrs shown as example of hrs set)
iii Press <Program> button once – clock is now set and
display shows ready for the first ON programme time
with ON and hours digits flashing.
3. To Set Programme ON/OFF Times
(after clock setting)
Programme 1 ON time
i
Press <Change> button to advance the hour setting.
ii Press <Program> button once to select minute time –
display shows minute digits and ON flashing.
Press <Change> button to advance minute setting.
(Note: 16 hrs shown as example of hours set).
Setting clock
Programme 1 ON
Programme 1 OFF
Programme 2 ON
Programme 2 OFF
Programme 3 ON
Programme 3 OFF
Programme 4 ON
Programme 4 OFF
Operating Mode
....
. . .
. . .
. . .
. . .
....➔
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4