Battery, Programming, Normal operating mode – Timeguard EL17 User Manual

Page 8: 1 to reset display, El17 programming instructions

Advertising
background image

27

Easy view 24

hour digital

clock/timer

display

Change Button

sets Day(s), Hours

and Minute times

and self cancelling

override

Programme Button

used to select the

clock time and the 6

ON/OFF

programme times

and to review them

once set

Output Status

showing unit

either ON or OFF

Battery

This product has a factory fitted rechargeable battery. If the time controller is left with

its mains power switched off for more than 1 month the display may go blank. In

this case switch mains on, wait 30 mins, and apply reset – see 1 before programming.

Programming

Only two setting buttons are provided <Change> and <Program>. During the

programme mode the <Change> button is used to set days and the hour and

minute times. Holding this button down achieves rapid selection of the day and

the hour and minute times. During normal operation it is used for changing the

output status. The <Program> button is used to select the clock time and 6 ON/

OFF programmes and to review them once set. Holding this button down

achieves rapid selection of the next programmes or can be used as a quick exit

from programme mode.

Normal Operating Mode

In normal operation the PanelMaster will display the

correct day and its time with the colon flashing. The output

status will be shown by either ON or OFF on the display.

1 To Reset Display

To clear programmes from memory and reset the time controller press

and hold down both buttons until the display goes blank.

Release buttons and display will fill with its complete

range of characters and then clear to show clock and

day 1 symbol flashing.

You are now in the clock setting mode

at the beginning of the programme sequence

EL17 Programming Instructions

Day indicator

1 = Monday

7 = Sunday

1 2 3 4 5 6 7

1 2 3 4 5 6 7

Advertising
This manual is related to the following products: