Transmille EA001A - Manual (Page 6)

EA001A THERMOCOUPLE SIMULATION & MEASUREMENT ADAPTER
OPERATION MANUAL
Transmille Ltd. Page 6
Design Notes
Special care has been taken over the cold junction compensation - a common source of
errors in thermocouple calibration. The cold function compensation (CJC) sensor is
mounted in the thermocouple plug itself. By measuring the cold junction at the instruments
input allows any type of thermocouple to be simulated without using compensation cables.
Intuitive Operation & Control
• Easy selection of thermocouple type
• Auto / Manual Cold Junction compensation
Quick and easy to use, simply plug in the
temperature adapter into the 3000 Series
calibrator, select thermocouple simulation mode
and thermocouple type using the soft keys and enter
the temperature required.