Transmille EA015 - Manual (Page 12)

EA015 MULTI FUNCTION WORKSTATION
OPERATION MANUAL
Transmille Ltd. Page 11
Functions : Insulation Test Voltage
Select the INSULATION TEST VOLTAGE tab
Connect meter to terminals marked Insulation resistance.
1 : Select a voltage range using the range buttons
2. Apply voltage from the Insulation tester
Functions : Continuity Resistance & Current
Connect meter to terminals marked continuity resistance.
Function will default to 1 Ohm range, with continuity current measurement. Select
continuity resistance as required by clicking the buttons available.
Note : Continuity current is available on the 1 Ohm range only