Transmille EA015 - Manual (Page 15)

EA015 MULTI FUNCTION WORKSTATION
OPERATION MANUAL
Transmille Ltd. Page 14
STEP 2 : Setting to DC or AC
Use the DC button to set to DC, or enter a frequency using the keypad, then press
Hz to set an AC frequency.
Frequency display within main window – DC or a frequency,
eg. 50Hz.
STEP 3 : Select a function
Select either Voltage or Current by using the buttons provided :
Volts Amps
STEP 4 : Select a Voltage / Current output
For voltage, once the output value is set and V is pressed, proceed directly to
STEP 5.
If the value entered is a
current, the choice of where
this should be output from is
available using the buttons
shown right. The available
buttons will flash, indicating
that a choice should be made.
50 Turn Coil : Available for currents between
100A and 1500A