Transmille EA015 - Manual (Page 14)

EA015 MULTI FUNCTION WORKSTATION
OPERATION MANUAL
Transmille Ltd. Page 13
The output panel, shown left, allows the user to select a
value to output and then automatically set the calibrator
output and switch to the appropriate terminals / coil output
on the workstation adapter.
STEP 1 : Enter an output value
The output value is entered using the keypad. Micro or milli can be selected using
the buttons provided :
micro milli
Numeric buttons 0-9 and decimal point – use these to enter a
value.
Set positive or negative value – note a number must be
entered first before clicking this Button.
Backspace – use this to erase the last character
entered in the output value box.