Transmille EA015 - Manual (Page 9)

EA015 MULTI FUNCTION WORKSTATION
OPERATION MANUAL
Transmille Ltd. Page 8
Using the EA015 with the
Virtual Front Panel Software
The EA015 workstation adapter should be connected as shown above.
The main terminals from the calibrator should be connected to the corresponding
terminals on the side of the adapter.
The adapter interface on the calibrator should be connected to the adapter
interface on the EA015 Workstation adapter.
The 15V external power supply should also be connected to the power socket of
the EA015 workstation adapter.
Installing the Software
Insert the CD which is supplied with the EA015 workstation adapter – this should
autorun and install the software.
Once installed run the software by clicking START > ALL PROGRAMS > EA015
Workstation Adapter
Selecting a COM Port
On starting the virtual front panel for the first time, a COM port selection screen will
be displayed. Click on the COM port that is connected to your 3000 Series calibrator
to continue.
If you are using a laptop to connect to the calibrator, the COM port will usually
be COM 1. A desktop computer will usually be COM 2.