Transmille 1000-Series - Manual (Page 82)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 82
Passive Resistance Commands
Function Range Command
Passive Resistance 10 Ohms R26
100 Ohms R27
1 kOhm R28
10 kOhms R29
100 kOhms R30
1 MOhms R31
10 MOhms R32
100 MOhms R33
Standby Mode
Standby ON S1
Standby OFF S0
Resistance
Passive output I0
Simulated output I2
The resistance section consists of a set of range commands which are used in
conjunction with the passive/simulated mode and standby commands. To enable a
resistance to be set, the following command sequence should be used :
<RANGE>/< MODE>/<STANDBY CONDITION><CR>
The use of the output (O) command is not necessary as the resistance ranges are
fixed ranges at decade points.