ADIC DAS V3.10E - Manual (Page 10)

10 Release Notes
603108 Rev A
The task list appears. If DAS is running, stop all
operations via DAS commands.
Step 2 Open an OS/2-window and change to directory
c:\das\bin
. Type cd c:\das\bin then
<ENTER>
Step 3 Stop the DAS Server by typing dasadmin
shutdown
.
Step 4 Insert the DAS diskette into drive A: of the AMU
computer.
Step 5 Change to drive A:. Type A: then <ENTER>
Step 6 Type dasfinst then <ENTER>
Step 7 Decide which feature of the installation program to
install. Type the corresponding installation option
number.
Step 8 Follow the instructions of the installation program.
Step 9 If DAS is being updated, do not reboot the PC or re-
configure DAS, or
For a new installation, continue with the DAS
Server Configuration and then reboot the PC.
DAS Server Configuration
For more detailed information about DAS, refer to the DAS
Administration Guide. Follow the steps for the DAS Server
configuration.
Step 1 For DUALDAS, the environment variable
DAS_SERVER must be specified with the hostname
or IP-address from one of the AMU-PC and,
separated by a comma, the hostname or IP-address
from the other AMU-PC.
Example: DAS_SERVER=activehostname,
passivehostname, or;
DAS_SERVER=passivehostname, activehostname
Step 2 Ensure that the hostnames from the DAS Server
and DAS Clients are set in the hosts file.