ADIC DAS V3.10E - Manual (Page 18)

18 Release Notes
603108 Rev A
• Switch the passive AMU and DAS to the active AMU and
DAS.
Switch the AMU:
• ACI function aci_switch
• dasadmin command switch
• Set the drives force UP and DOWN.
• Support HICAP.
• Support DUAL DAS as a redundant interface for Unix to
Hosts interface that use TCP/IP.
• Support a command to flip a volume from side A to B or
side B to A in a drive.
Flip volumes:
• ACI function aci_flip
• dasadmin command flip
• Support volser attachment to either side A or side B
Get volser attachment to either side:
• ACI function aci_getvolsertoside
• dasadmin command getvoltoside
• Support a new drive access to allocate a drive with
exclusive status.
Get volser to drive attachment:
• ACI function aci_getvolsertodrive
• dasadmin command getvolsertodrive
Exclusive driveaccess:
• ACI function aci_driveaccess
• dasadmin command allocd
• Support a command to allocate volsers.
Volseraccess:
• ACI function aci_volseraccess
• dasadmin command allocv
Volserstatus:
• ACI function aci_volserstatus
• dasadmin command istv
• Support the possibility to define a volser attachment to a
drive in the config file.
• Support Log ID (1 .. 9999) for mount and dismount.