ADIC DAS V3.10E - Manual (Page 23)

Version 3.10E DAS Release Notes 23
21 Dec 2001
Corrections in DAS 3.10A
Addressed Problem Logs
Table 6 Problems solved with DAS 3.1A
Ticket
Number
Description
- ET51731 A client named ‚AMU' has access to a drive which
is allocated from ‚AMUCLIENT'
Output of ‚dasadmin ld' shows ‚clientname EXUP'
as clientname instead of only the clientname
Scr_set possible for DTF large medium
- ET56697 Trap at das2 if a '-' was used as volserrange in the
volser allocation command (allocv)
Release of LogHandles in ExitList
Possible to run two aci_function in one process
under OS/2.
Changes in socket termination.
Wrong error codes in response of eject2 for some
volsers. Each volser has now the correct error
code.
No check of media type during the view command
Wrong response at the command scap with
parameter ‚-v' if the volserrange was not found
- ET58331 DAS trap with insert2 if cleanpool is longer than
16 characters
- ET61441 Show command does not show all ranges if the
Scap command with parameter ‚-v' removed a
volser range which was placed in the middle of the
list.