American Dryer AD-120ES - Manual (Page 42)

38
8. Each dryer should be operated through one complete cycle to assure that no further adjustments are
necessary and that ALL components are functioning properly.
9. Make a complete operational check of ALL operating controls.
a. Microprocessor controller (computer) programs/selections...
1) Each microprocessor controller (computer) has been preprogrammed by the factory with the most
commonly used parameter (program) selections. If computer program changes are required, refer to
the computer programming manual which was shipped with the dryer.
b. Dual timer dryers check...
1) Heating Timer
2) Cool Down Timer
3) Temperature Selection Switch