Anchor Industries NAV50-1204 - Manual (Page 9)

1
3
4
2
6 5
7
INSTALL DROP-IN HIPS AND HIP BRACES IN THE ORDER SHOWN.
HINT: TO ALIGN HIP BRACES , LIFT CENTER OF HIP BAR, THEN
DROP THE HIP BRACE CONNECTORS CLEANLY INTO FITTINGS
AND SECURE WITH LANYARD PINS.
IF YOU ARE CONSTRUCTING AN EXTENDED RECTANGULAR
TENT, INSTALL FABRIC THIS HIP END IS COMPLETE.
IF YOU ARE CONSTRUCTING A SQUARE TENT, PROCEED TO
THE NEXT STEP.
USE LIFTING CRADLES AS NEEDED TO
MAKE HIP-PEAK CONNECTIONS
PRE-ASSEMBLING THE HIP MEMBER
COMPLETING HIP END TOP FRAME
ASSEMBLING HIP END TOP FRAME
HIP END
FIT-
HIP END
FIT-
UPRIGHT BRACES
HIP BRACES
HIP LOWER SPLICES
HIP UPPER SPLICES
FOR MOST EASE, MAKE
CONNECTIONS IN ORDER
SHOWN.
PUSH AGAINST PEAK TO
ENGAGE SLIP JOINT.
HEAVY-DUTY
NAVI-TRAC
FRAME LIFTS
8-T
8-B
8
8
15
13
14
12
11
10
9
INSTALL TOP & BOTTOM END FITTINGS INTO HIPS AND SECURE
WITH LANYARD PINS. BOLT THE UPPER AND LOWER SPLICE
SECTIONS TOGETHER.
RAFTERS, INTERMEDIA
TE
FIXED-BASES
2
10 8
1
9
5 3
7
4 6