Brother MFC-5890CN - Manual (Page 130)

Control panel setup
120
6
Pre-configuring your FTP profiles
6
a Press MENU.
b Press a or b to choose Network.
c
Press a or b to choose Scan to FTP.
d
Press a or b to choose Setup Profile.
e
Press a or b to choose Not Registered.
f
Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 30 characters.
Press OK.
g Choose Name (your FTP server name) or IP Address.
h
Enter the FTP server name (for example ftp.example.com) (up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
i Press a or b to choose Store Directory.
j Enter the destination folder where your document will be stored on the FTP server (for example
/brother/abc/) (up to 60 characters).
Press OK.
k Press a or b to choose Username.
l Enter the Username that has been registered with the FTP server for the machine (up to 32 characters).
Press OK.
m Press a or b to choose Password.
n Enter the Password for access to the FTP server (up to 32 characters).
Press OK.
o Press a or b to choose Quality.
p Press to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B/W 200 dpi or
B/W 200x100 dpi.
q
Choose the file type for the document. Press a or b to choose File Type.
r Press to choose PDF or JPEG for color or gray scale documents and PDF or TIFF for B/W documents.
Note
If you are using the scanner glass of the machine, choose the document size.
• Press a or b to choose Glass ScanSize.
• Choose the document size you want.