Brother MFC-5890CN - Manual (Page 90)

Control panel setup
80
6
For MFC-5490CN
6
a Press Menu, 5, 1, 3.
b Choose 1 to change. Enter the Subnet Mask address.
Press OK.
c Press Stop/Exit.
For Touchscreen models
6
a
Press MENU.
b
Press Network.
c
(For Wired) Press Wired LAN.
(For Wireless) Press WLAN.
d
Press TCP/IP.
e
Press Subnet Mask.
f Enter the Subnet Mask address.
Press OK.
g Press Stop/Exit.
Gateway
6
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a Press Menu.
b
Press a or b to choose Network.
Press OK.
c (For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d Press a or b to choose TCP/IP.
Press OK.
e Press a or b to choose Gateway.
Press OK.