Brother MFC-J870DW - Manual (Page 14)

Chapter 2
8
Changing your Memory Security
password
2
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Miscellaneous.
f
Press Miscellaneous.
g
Press Memory Security.
h
Press Set Password.
i
Enter the registered 4-digit number for
the current password using the
keyboard on the Touchscreen.
Press OK.
j
Enter a 4-digit number for a new
password using the keyboard on the
Touchscreen.
Press OK.
k
When the Touchscreen shows Verify,
re-enter the new password using the
keyboard on the Touchscreen.
Press OK.
l
Press .
Turning Memory Security
on/off
2
Turning on Memory Security
2
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Miscellaneous.
f
Press Miscellaneous.
g
Press Memory Security.
h
Press Set Security.
i
Enter the registered 4-digit password
using the keyboard on the Touchscreen.
Press OK.
The machine goes offline and the
Touchscreen shows
Memory Security.
NOTE
If there is a power failure the data will stay
in memory for approximately 24 hours.
Turning off Memory Security
2
a
Press Unlock.
b
Enter the registered 4-digit password
using the keyboard on the Touchscreen.
Press OK.
Memory Security is turned off.
NOTE
If you enter the wrong password, the
Touchscreen shows Wrong Password
and stays offline. The machine will stay in
Secure mode until the registered
password is entered.