Brother MFC-J870DW - Manual (Page 76)

Chapter 8
70
How to set a new default
8
You can save the Scan to Media settings
(Scan Type, Resolution, File Type,
Scan Size, Auto Crop
1
and
Remove Background Color) you use
most often by setting them as the default
settings. These settings will stay until you
change them again.
1 MFC-J870DW and MFC-J875DW only
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Scan to Media.
d
Press Options.
e
Press a or b to display Scan Type,
Resolution, File Type,
Scan Size, Auto Crop
1
or
Remove Background Color, and
then press the setting you want to
change. Then press the option you want
to set.
1
MFC-J870DW and MFC-J875DW only
Repeat this step for each setting you
want to change.
f
After you are finished choosing your
preferred settings, press a or b to
display Set New Default.
g
Press Set New Default.
h
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
i
Press .
How to reset to the factory
settings
8
You can restore all the Scan to Media settings
(Scan Type, Resolution, File Type,
Scan Size, Auto Crop
1 and
Remove Background Color), that you
have changed, to the factory settings.
1 MFC-J870DW and MFC-J875DW only
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Scan to Media.
d
Press Options.
e
Press a or b to display
Factory Reset.
f
Press Factory Reset.
g
The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
h
Press .