Brother MFC-J870DW - Manual (Page 15)

9
3
3
Additional sending
options
3
Sending faxes using multiple
settings
3
When you send a fax, you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Glass Scan Size, and Real Time TX.
You can also choose: Call History,
Address Book, Broadcasting,
Preview
1 , Color Setting,
Delayed Fax, Batch TX, Polled TX,
Polling RX, Overseas Mode,
Set New Default, and Factory Reset.
1 MFC-J870DW and MFC-J875DW only
Some settings are only available when
sending black & white faxes.
a
Load your document.
b
(MFC-J650DW)
Press (Fax).
(MFC-J870DW and MFC-J875DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
(Sending Faxes).
The Touchscreen shows:
c
Press Options.
d
Press a or b to display the setting you
want to change. When the setting is
displayed, press it.
e
Press the option you want to set.
f
Repeat steps d and e to change
additional settings.
g
Press OK when you are finished
changing settings.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again. (See Setting
your changes as the new default
on page 11.)
• You can also save some of the settings
you use most often by setting them as a
Shortcut. (See Saving fax options as a
Shortcut on page 12.)
Sending a fax
3