Brother MFC 9840CDW - Manual (Page 75)

Dialing and storing numbers
59
8
Search
8
You can search alphabetically for names you
have stored in the One-Touch and
Speed-Dial memories. (See Storing
one-touch dial numbers on page 60 and
Storing speed-dial numbers on page 61.)
a
Press Search/Speed Dial.
b
Press the dial pad key for the first letter
of the name.
(Use the chart on Entering text on
page 222 to help you enter letters.)
Press OK.
c
Press a or b to scroll until you find the
name you are looking for.
Press OK.
Note
You can press Resolution to change the
displayed resolution.
d
Press Black Start or Color Start.
Note
• If you do not enter a letter and Press OK
in b, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first letter of the name,
it means that a name for the letter is not
stored.
LDAP Search
8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (For details about how to set up
LDAP see the Network User’s Guide on the
CD-ROM.)
Fax redial
8
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Black Start or Color Start to try again. If you
want to make a second call to the last number
dialed, you can save time by pressing
Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.